Tuesday, August 1, 2017

How to Hand Roll Fence



How to Hand Roll Fence:

We get calls and walk in customers every day that have small amounts of fence or specialty jobs that do not lend well to the spray method of applying our products. While rolling and brushing fence may sound easy it can be intimidating and overwhelming to get started. This blog should help you with deciding if rolling will work for your planned project. I will also share some tips and tricks we have learned over 32 years of rolling and brushing fence.

Don’t’ get us wrong, sprayers are great and can be an awesome way to paint fence. However, most people don’t know all that goes into setting up a spray rig, and how messy it can end up being. Did you know if you have 1000 feet of 4 board fence you can roll it in the same time it takes to setup a spray rig? Our rule of thumb is one man can roll 1000 feet of fence, both sides, in one day. That day however, would be a very hard day of work for a hard working person.

Rolling may be advantageous for those that have fence in close proximity to landscaping or outbuildings or other objects that would make spraying difficult due to overspray. Some customers are willing to roll and brush just to keep paint off of their grass.

The way we have learned to roll fence in our 32 years of business is to first select that right equipment setup.
For fence we recommend a 7” roller with no extension pole. The best roller covers to use are 1” or more thick nap. A wire mesh roller screen in your bucket will help conserve paint. These are way better than typical roller pans. This size roller and cover allows you to get in most cracks and crevices on fence. This size nap and roller also allows for easy rolling of posts. Thick naps allow the roller more curvature to cover more of a post in one pass. Paint posts with a vertical motion then turn your roller horizontally to get in behind where boards meet posts, I promise they will fit in that crack. When rolling fence or painting it with equipment it is important to remember not to paint the bottom of the horizontal boards. Wood naturally absorbs moisture and leaving board bottoms unpainted satisfies their need to breathe to release this moisture. Paint the tops of boards and posts when going down both sides of the fence. This gives the posts and board tops essentially 2 coats. This is important for board and post life because they take the majority of weathering. 

There are some instances that make this application method challenging. A couple examples are new unpainted fence with baton boards and woven wire fence with wire that prohibits rolling the wood surfaces. It is hard to get a brush or roller behind baton boards on new fence. You don’t have to worry about this as much on recoats because this area takes almost no weather and paint will last behind baton boards longer than on horizontal boards.

While any fence painting job may seem challenging or daunting, once you get going it will go faster than you think. One of the largest horse farms in central Kentucky maintains over 100 miles of 4 board horse fence with rollers. This is their personal preference, probably not the most economical choice for them. Do not hesitate to call us, we are more that happy to share our knowledge and experience in any way we can to meet your project goals and make it a success.

Fence Paint Application Methods


Thank you for checking out Lexington Paint and Supply.  We would like to start this blog by answering some very frequently asked questions.


Question 1 – What is the best way to apply Fence Paint to my fence?


The answer to this question varies with each fence paint job, but all jobs are either hand applied or sprayed.  Both of these methods can be used effectively.  The primary variables that determine which method is best on any particular job includes –

Job size

Equipment availability

Labor availability

Personal preference

First it is important to realize that both methods are acceptable and you should see virtually identical material performance either way.  The one very obvious exception to this is new fence (previously unpainted) with facial boards.  It is very difficult to paint behind these boards without the use of a sprayer.   A good rule of thumb is, one person should be able to paint 800 feet of fence (both sides) in one 8 hour day.  This breaks down to 100 feet/hour.  I am asked about equipment almost every day.  The first question I ask is “how big is your job”.  The time, effort and money needed to set up a sprayer is often greater than what it would take to complete the job by hand applying.  Don't get caught in the trap of spending three days to set up for a job that only takes two days to complete by hand.  This is very easy to do.  I talk to a great number of individuals that just love equipment.  With these people it is not about efficiency, but it is about the equipment.  If you love equipment that’s fine.  We can help you pick out the right machine (look for the next blog to cover equipment).  If you simply want your fence painted the most cost effective way, don’t overlook hand applying the material.  This method is often the most efficient way, especially on smaller jobs (less than 7500 ft).

On larger jobs, spraying is often the most efficient method.  I will break down spraying into two sub categories, self-spray and contractor spray.  Let’s start with contractors.  The first thing to consider is job location.  If your property is located in the Lexington KY or Ocala FL area, it will be very difficult to spray your fence yourself any cheaper than you can hire a contractor.  The fence spraying business is ultra-competitive in these areas and if you consider the true cost of paint application, I don’t think you can beat contractors with any job size.  If your property is located outside of this type of area, you may be able to save some money by applying the material yourself.  Feel free to call us and even though we don’t do any application ourselves, we can give you a good idea what a contractor may want for your job size in your area.  You should consider both local contractors and out of town contractors.  The contractors located in highly fenced areas are extremely efficient and can often times complete jobs cheaper even with the added cost of travel. 

If you choose to self-apply your fence paint job, don’t just consider the cost of the sprayer.  You will also need a transportation method.  If you have an old wagon and tractor, that you don’t mind getting very dirty, this cost may be very low.  If on the other hand you don’t have an old tractor, you need to consider you could damage a nicer vehicle with stray paint.  Here are some guidelines you need to consider in your planning.  Another rule of thumb – a one gallon per minute sprayer that is manned by one person and is adequately transported should be able to paint about 2000 feet of fence (both sides) per 8 hour day.  If the sprayer size or transportation method are reduced, the output will drop accordingly.  If you like math, you have already figured out that spraying (with good setup) has 2 ½ times the output of hand applying.  That is not a huge number especially considering the cost of equipment and transportation method.

Your particular circumstances may be entirely different than what I’ve talked about.  If you have farm help with extra time in the afternoons, hand applying may make great sense on a huge job.  If you have ready access to a sprayer, your choice could be made easy.  If you need the job done fast, you may need to use a contractor.  Whatever your circumstances are, please feel free to call and discuss them with us.  We have been doing this for 32 years and there aren’t many situation we haven’t already seen.  We are here to help.          

How to Hanlde 55 Gallon Drums





55 gallon drums of black paint weigh in between 450-500 lbs, with white paint weighing more. This can create challenges for the farmer, home owner, and even contractor. 

With our combined 100+ years of paint experience we have gotten extremely efficient at handling these drums.

The most common question we get asked when a customer decides to purchase paint in drums is, how do I get the paint out of the drum to apply it?

Our customers tend to assume a drum pump is the best way. There are several types of drum pumps and the proper type will work fine. However, choose the wrong pump and it will work as well… For about 10 minutes before you have a giant mess to clean up. Drum pumps are also expensive.

For the customer painting by hand or with small sprayers we have found a much cheaper and easier option, valves. 55 gallon drums come with 2 bung holes in the top. These holes are both threaded. One is 2” and the other is ¾”. A common boiler/spigot valve or specialty drum valve work well. We sell both sizes of valves. However, ¾” are much cheaper and easier to locate if not purchasing from us. The valves screw directly into the bung hole(s) on top of the drum.

Steps for removing paint from a drum using a valve:

1.      Place drum in elevated position. i.e. Pickup truck bed, farm wagon, trailer, loading chute etc. Make sure a 5 gallon bucket can fit between drum and ground.
2.      Remove desired bung lid. Screw valve into bung hole. Make sure remaining bung is sealed properly.
3.      Carefully tip drum onto its side taking precautions to not let valve hit anything on the way over. If drum valve comes into contact with ground or other object it can break off causing paint to spill. The best way to achieve this without spillage is to tip drum so that once it lands the valve is in the top position, rather than on the bottom.
4.      Roll drum so that valve is now at bottom of drum.
5.      Place 5 gallon bucket under spigot.
6.      Open spigot and fill bucket. Be careful, open valve slowly until you have achieved desired fill rate. For the first 5-10 gallons (1-2 buckets) the non-valved bung must remain in place to avoid spillage. That bung can be loosened to allow venting. The paint will gurgle and flow slowly as long as that bung is in place. After the remaining paint is below that bung it can be removed. This will allow air flow, reducing gurgling and increasing flow.
7.      Close valve and go paint. Refill bucket as needed.

For contractor or large users with large paint spray pumps:

We assemble and sell drum suction kits. These kits attach in place of the 5 gallon bucket snorkel kits that come with most every sprayer. The kit we make allows the paint sprayer to pull paint directly out of 55 gallon drums eliminating the need to pour paint into buckets which greatly increases efficiency, productivity and painting speed. As with 5 gallon kits, these come with suction hose, drum length intake pipe, and rock guard. We have various size adapters to fit most commercial sprayers.
I must stress that these kits generally only work for large sprayers. Please call us with sprayer make and model readily available. We can determine if your sprayer will handle this kit. Many customers don’t realize that even though most sprayers are capable of holding high pressures on the pump side, they do not have much suction power.

Thanks you for choosing Lexington Paint & Supply! 

Hand Painting Fence Rollers


Hi Everyone,

As everyone gears up for spring 2016 and our 35th painting season, we wanted to do another post about hand painting fence. As we previously mentioned in a lot of "small job" cases it is easier and more efficient to complete your fence painting job with rollers as opposed to spraying. 

That being said we have finally found and are stocking what we think is the perfect roller for equine and agriculture fence work. We now carry 7" thick nap rollers, frames, and bucket grids. We chose the heaviest roller frame we could find. We believe these will stand up to the abuse of painting fence.

The benefit of 7" over 9" is less wasted roller resulting in more paint getting on the fence rather than on you and the ground. 7" rollers allow you to cover the entire board at once without having to double stroke as you would with a smaller roller. 

We have seen over the years that thick nap rollers are far superior to shorter nap rollers and brushes. Our roller covers have a 1 1/4" thick nap. These allow you to paint virtually the entire fence without picking up a brush, saving time and energy. This nap allows you to jab the roller around all areas of the posts, especially on the backside of where the boards meet the post. The thick nap also allows fewer strokes to cover the entire post as the roller moves more freely to match the contour of the post.

It is important to note that rough sawed fence lumber is hard on roller covers. The wood fibers are very apt to pull and tug at roller covers shortening their life. Do not expect one roller cover to last all day. 

These rollers are the most cost effective way of DIY painting. We chose to carry this line of roller covers and frames based on customer feedback. Everyone seemed to like the product test last fall.  Call us or stop by for pricing, you can’t beat our paint quality or prices anywhere and we are confident we have the best bang for your buck hand painting equipment out there as well.

Thanks everyone for the continued business and we look forward to serving you into the future.